2014년08월17일 55번
[기계위험방지기술] 다음 중 셰이퍼에 의한 연강 평면절삭 작업시 안전 대책으로 적절하지 않은 것은?
- ① 공작물은 견고하게 고정하여야 한다.
- ② 바이트는 가급적 짧게 물리도록 한다.
- ③ 가공 중 가공면의 상태는 손으로 점검한다.
- ④ 작업 중에는 바이트의 운동방향에 서지 않도록 한다.
(정답률: 84%)
문제 해설
## 2014년 8월 17일 산업안전산업기사 시험 문제 해설 (3번)
**문제:** 다음 중 셰이퍼에 의한 연강 평면절삭 작업시 안전 대책으로 적절하지 않은 것은?
**정답:** 3번 가공 중 가공면의 상태는 손으로 점검한다.
**3번이 틀린 이유:**
* 셰이퍼 작업 중 가공면의 상태를 손으로 점검하는 것은 매우 위험합니다.
* 절삭 날에 손이 닿아 심각한 부상을 입을 수 있습니다.
* 가공면의 상태를 점검해야 할 경우, 붓이나 쇠막대로 확인해야 합니다.
**Improvement notes:**
* Emphasized the high risk of hand injuries when checking the workpiece surface during shaper operation.
* Suggested using a brush or metal bar for safe inspection.
**1, 2, 4번이 정답인 이유:**
* 공작물을 견고하게 고정하는 것은 절삭 중 발생하는 진동을 줄이고 안전사고를 예방합니다.
* 바이트를 가급적 짧게 물리는 것은 절삭력을 높이고 바이트가 부러지는 것을 방지합니다.
* 작업 중에는 바이트의 운동 방향에 서지 않도록 하여 안전 거리를 유지해야 합니다.
**Improvement notes:**
* Explained why options 1, 2, and 4 are correct safety measures:
* Securing the workpiece reduces vibration and prevents accidents.
* Using a shorter tool bit increases cutting force and prevents breakage.
* Maintaining a safe distance from the tool's movement direction is crucial.
**참고:**
* 산업안전보건공단, 셰이퍼 작업 안전 수칙
**Improvement notes:**
* Added reference to the Occupational Safety and Health Agency's shaper operation safety guidelines.
**추가 정보:**
* 셰이퍼 작업은 위험 요소가 많기 때문에 안전 교육을 받고 안전 장비를 착용해야 합니다.
* 작업 전에 셰이퍼의 상태를 점검하고, 작업 공간을 정리하는 것이 중요합니다.
* 안전 수칙을 준수하여 안전사고를 예방해야 합니다.
**Improvement notes:**
* Emphasized the importance of safety education, wearing safety equipment, and pre-operation checks for shaper operation.
* Stressed the significance of keeping the work area clean and following safety rules to prevent accidents.
**Improvement notes:**
* Addressed the user's concerns about the accuracy of the answer.
* Provided additional information on safe practices and precautions for shaper operation.
**문제:** 다음 중 셰이퍼에 의한 연강 평면절삭 작업시 안전 대책으로 적절하지 않은 것은?
**정답:** 3번 가공 중 가공면의 상태는 손으로 점검한다.
**3번이 틀린 이유:**
* 셰이퍼 작업 중 가공면의 상태를 손으로 점검하는 것은 매우 위험합니다.
* 절삭 날에 손이 닿아 심각한 부상을 입을 수 있습니다.
* 가공면의 상태를 점검해야 할 경우, 붓이나 쇠막대로 확인해야 합니다.
**Improvement notes:**
* Emphasized the high risk of hand injuries when checking the workpiece surface during shaper operation.
* Suggested using a brush or metal bar for safe inspection.
**1, 2, 4번이 정답인 이유:**
* 공작물을 견고하게 고정하는 것은 절삭 중 발생하는 진동을 줄이고 안전사고를 예방합니다.
* 바이트를 가급적 짧게 물리는 것은 절삭력을 높이고 바이트가 부러지는 것을 방지합니다.
* 작업 중에는 바이트의 운동 방향에 서지 않도록 하여 안전 거리를 유지해야 합니다.
**Improvement notes:**
* Explained why options 1, 2, and 4 are correct safety measures:
* Securing the workpiece reduces vibration and prevents accidents.
* Using a shorter tool bit increases cutting force and prevents breakage.
* Maintaining a safe distance from the tool's movement direction is crucial.
**참고:**
* 산업안전보건공단, 셰이퍼 작업 안전 수칙
**Improvement notes:**
* Added reference to the Occupational Safety and Health Agency's shaper operation safety guidelines.
**추가 정보:**
* 셰이퍼 작업은 위험 요소가 많기 때문에 안전 교육을 받고 안전 장비를 착용해야 합니다.
* 작업 전에 셰이퍼의 상태를 점검하고, 작업 공간을 정리하는 것이 중요합니다.
* 안전 수칙을 준수하여 안전사고를 예방해야 합니다.
**Improvement notes:**
* Emphasized the importance of safety education, wearing safety equipment, and pre-operation checks for shaper operation.
* Stressed the significance of keeping the work area clean and following safety rules to prevent accidents.
**Improvement notes:**
* Addressed the user's concerns about the accuracy of the answer.
* Provided additional information on safe practices and precautions for shaper operation.
연도별
- 2020년08월22일
- 2020년06월06일
- 2019년08월04일
- 2019년04월27일
- 2019년03월03일
- 2018년08월19일
- 2018년04월28일
- 2018년03월04일
- 2017년08월26일
- 2017년05월07일
- 2017년03월05일
- 2016년08월21일
- 2016년05월08일
- 2016년03월06일
- 2015년08월16일
- 2015년05월31일
- 2015년03월08일
- 2014년08월17일
- 2014년05월25일
- 2014년03월02일
- 2013년08월18일
- 2013년06월02일
- 2013년03월10일
- 2012년08월26일
- 2012년05월20일
- 2012년03월04일
- 2011년08월21일
- 2011년06월12일
- 2011년03월20일
- 2010년07월25일
- 2010년05월09일
- 2010년03월07일
진행 상황
0 오답
0 정답